Philips AC4005, Руководство пользователя

Страница: 7 / 18

5
EN
3 Get started
Install filters
The appliance comes with all filters fitted
inside, but you have to remove the packaging
of the filters before you can use the appliance.
Remove all filters, unpack them, and place them
back into the appliance as described below.
Tip
•
When you remove or insert filters, place the appliance
against a wall for more stability.
Note
•
Insert the filters in the correct position.
1
Place your fingers in the recesses of the
side panels and gently pull the top part of
the front panel towards you.
2
Lift the hooks at the bottom of the panel
out of the bottom of the appliance.
3
Remove all the filters from the appliance.
4
Remove all packaging material from the
filters.
5
Put the HEPA filter back into the appliance.
Note
•
Make sure that the side with the tag is pointing towards
you.
6
Place the activated carbon filter into the
pre-filter.
7
Place the pre-filer in the appliance.
Note
•
Make sure that the side with the two projections is
pointing towards you, and that all hooks are properly
attached to the appliance.