Philips AC3858/83, Руководство пользователя

Страница: 16 / 36

14 EN
Replacing.the.filter
Understanding the healthy protection lock
This air purifier is equipped with a filter replacement indicator to make sure that the air purification
filter is in optimal condition when the air purifier is operating. When the filter need to be replaced, the
filter replacement alert lights up red.
If the filter is not replaced in time, the air purifier will stop operating and automatically lock to protect
the air quality in the room. Replace the filter as soon as possible.
Replacing.the.filter
Note:
• The filter is not washable or reusable.
• Always turn off the air purifier and unplug from the electrical outlet before replacing the filter.
Filter.alert.light.status Action
The filter replacement
alert lights up
Replace the
NanoProtect filter
Series 3 (FY4440/30)
1 Switch off the air purifier and unplug from the power socket.
2 3 4 5 6
2 Pull the back cover and remove it from the appliance.
3 Pull the filter from the appliance.
4 Remove all packaging materials of the new filter.
5 Put the new filter into the appliance.
6 Reattach the back cover.
7 Put the plug of the air purifier in the power socket.
8 Touch the button to switch on the appliance.
9 Touch and hold the filter status check/reset button for 3 seconds to
reset the filter lifetime counter.
10 Wash your hands thoroughly after replacing the filter.
Note: Do not smell the filter as it has collected pollutants from the air.
Change lter
then long
press to
reset lter Change lter
then long
press to
reset lter
PM2.5
IAI
Gas
2
Filter has been replaced.