47
EN
E
ngl
ish
3
Wash the pre-filter under a running
tap. If the pre-filter is very dirty, use
a soft brush to brush away the dust.
4
Air dry the pre-filter.
Note
•
Make sure that the pre-filter is
completely dry. If it is still wet,
bacteria may multiply in it and
shorten the lifetime of the pre-filter.
5
After the pre-filter is completely dry,
place it back into the back panel.
6
Touch and hold for 3 seconds to
reset the pre-filter cleaning time.
Cleaning the pre-filter
Note
•
If the pre-filter is damaged, worn or
broken, do not use. Visit
www.philips.com/support or
contact the Consumer Care Center
in your country.
Filter alert light
status
Follow this
F0 displays on the
screen and wick&
pre-filter cleaning
alert
goes on
Clean the pre-
filter
1
Pull the top part of the back panel
towards you to release it from the
appliance.
2
To remove the pre-filter, press the
two clips down and pull the filter
towards you.
Содержание AC3822
