Philips AC3822, Руководство пользователя

Страница: 39 / 62

39 EN
E
ngl
ish
4 Use the
appliance
Understanding the air
quality light
PM2.5
level Air quality
light color Air quality
level
≤
35 Blue Good
36-75 Blue-Purple Fair
76-115 Purple-Red Poor
>115 Red Very poor
The air quality light automatically goes
on when the appliance is switched on,
and lights up all colors in sequence.
In a short time the air quality sensors
select the color that corresponds to the
ambient air quality.
Switching on and off
1
Put the plug in the power socket.
»
The appliance beeps.
2
Touch to switch on the
appliance.
» The appliance operates under
the 2-in-1 mode by default with
displayed on the screen.
»
When the appliance is warming
up, "
" displays on the
screen. After measuring the
particulate matter only in the
air, the appliance shows the
PM2.5 level and operates in the
auto mode by default.
» After measuring the air
quality for approximately
30 seconds, the air quality
sensor automatically selects
the appropriate air quality light
color.
3
Touch and hold for 3 seconds to
switch off the appliance.
Note
•
After the appliance is switched
off by the on/off button
, if the
plug is still in the power socket, the
appliance will operate under the
previous settings when it is switched
on again.
Setting the humidity
level
1
Touch the humidity button
repeatedly to set the desired air
humidity to 40%, 50%, 60% or "
".
Note
•
When the humidity level " " is
chosen, the appliance will keep
humidifying the room until the
ambient humidity level reaches
70%RH.
Note
•
When the target humidity level is
reached, the wick wheel will stop
rotating. It will start rotating again
when the humidity drops below the
target level.
•
If you want to increase the humidity
level quickly, you can select a
higher fan speed.