15
EN
6 Storage
1
Turn off the air purifier and unplug from the power socket.
2
Clean the air purifier, particle sensor and the surface of the filter (see chapter
“Cleaning and maintenance”).
3
Let all parts air dry thoroughly before storing.
4
Wrap the filter in air tight plastic bags.
5
Store the air purifier, filter in a cool, dry location.
6
Always thoroughly wash hands after handling the filter.
7 Troubleshooting
This chapter summarizes the most common problems you could encounter with
the appliance. If you are unable to solve the problem with the information below,
contact the Consumer Care Center in your country.
Problem
Possible solution
The appliance does
not work properly.
•
The filter replacement alert has been on continuously
but you have not replaced the corresponding filter. As a
result, the appliance is now locked. In this case, replace the
filter and long touch and to reset the filter lifetime
counter.
The airflow that
comes out of
the air outlet
is significantly
weaker than
before.
•
The surface of the filter is dirty. Clean the surface of the
filter (see the chapter “Cleaning and maintenance”).
The air quality
does not improve,
even though the
appliance has been
operating for a
long time�
•
Check if the packing material is removed from the filter.
•
The filter has not been placed in the appliance. Make sure
that the filter (FY1700/30) is properly installed.
•
The particle sensor is wet. The humidity level in your room
is high and causes condensation. Make sure that the
particle sensor is clean and dry (see the chapter “Cleaning
and maintenance”).
•
Room size is large or the outdoor air quality is poor.
For optimum purification performance, please close the
doors and windows when operating the air purifier.
•
There are indoor pollution resources. For instances,
smoking, cooking, incense, perfume or alcohol.
•
Filter reaches the end of life. Replace the filter with a new
one�
