Philips 868 User Guide
Page 67 of 89
PIN Code
: a code protects your SIM card against unauthorized use, also known as a Personal
Identification Number. If activated, you will be asked to enter your PIN each time you make a
call. Your PIN is usually supplied with the SIM card. If you enter an incorrect PIN code three
times in succession, the code is disabled and cannot be used until you re-enable it by entering
the PUK.
z
To set PIN code, you can move the cursor to PIN Code, and press [Select] to access the
PIN code setting screen. After entering the PIN code, you can press [OK] to save the
setting and exit the PIN code setting screen, and the checkbox before PIN Code will be
checked.
z
To deactivate the PIN code, you can move the cursor to PIN Code and press [Cancel] to
access the PIN code input screen (at most 3 tries), and then you can enter the PIN code
you has set before and press [OK] to go back to the previous screen, and then the
checkbox before PIN Code will become unchecked.
Note:
1)
PIN2: a code supplied with specific SIM cards, which is required to access specific
functions, such as setting the maximum cost of a call.
2)
PUK: a number key which is required to unblock a blocked PIN, also known as the
Personal Unblocking Key. The PUK may be supplied with the SIM card. If not
supplied or it is lost, please contact your service provider.)
Privacy Protection
: enables you to protect personal data such as your directory, call records,
and so on. If activated, you will be asked to enter the phone & privacy code before accessing
the protected data.
z
To activate Privacy protection, you can move the cursor to Privacy protection, and press
[Select] to access the data protection type list. To protect a certain type of data, you can
move the cursor to the desired type and press the left soft key [Select], and then press
[OK] to save the setting.
Note: To disable privacy protection, you will also be required to enter the phone code.
Edit Phone & privacy code
To edit the phone & privacy code, you can move the cursor to the Phone Code and press [OK],
the screen will prompt “Old code:” for entering the old code, and then prompt “New code:” if the
correct old code has been entered, and then prompt “Re-enter:” for entering the new code
again. After re-entering the new code again, you can press [OK] to save the new phone code.
Edit PIN code
z
When the PIN code has been activated, you can move the cursor to Edit PIN and press
[OK] to edit the PIN code. The screen will display the following prompt message: ”Enter
old PIN, Left times: 3”. If the correct old PIN code has been entered within 3 tries, the
screen will display the following prompt message: “Enter new PIN”, and the “Re-enter” for
entering the new PIN code again. After re-enter the new PIN code, you can press [OK] to
save new PIN code and exit the PIN code editing screen.
z
If the correct old PIN code has not been entered with 3 tries, the screen will display
following prompt:”Enter PUK, Left times: 10”. If the correct PUK number has been