Philips 7592, Руководство по обслуживанию

Страница: 56 / 323

Explanation notes/references:
1
Operation Hours (Run Timer):
This display indicates the accumulated total of operational hours. (Shown in hexadecimal
format)
2 Software identification of the main micro controller (A10US1-2.7)
A10 is the engineering chassis name for the H8 chassis
•
US1 is 2 letter and 1 digit combination to indicate the software type and the supported
languages:
•
US = USA
•
1 = Main Software language version number
•
2.7 = sub-version number
3 Error buffer (7 errors possible) Displays the 7 most recent errors. The most recent
error is displayed at the upper left.
4 Option bytes (8 codes possible), summary of options are explained below.
5 Sub menus are listed in a scroll-menu.
SAM Menu Control
Menu items may be selected using the cursor UP/DOWN key.
•
The selected item will be highlighted.
•
When not all menu items will fit on the screen, pressing the cursor UP/DOWN key on the remote transmitter will display the
next/previous menu items.
With the cursor LEFT/RIGHT keys, it is possible to:
•
(de)activate the selected menu item (e.g. GEOMETRY)
•
change the value of the selected menu item ( e.g. VER-SLOPE )
•
activate the selected submenu (e.g. SERV-BLK)
Access to normal user menu
Pressing the “MENU” button on the remote control switches between the SDM and the normal user menus (with the SAM
mode still active in the background). Pressing the “MENU” key in a submenu will return the screen to the previous menu.
The Menus and Submenus
CLEAR ERRORS
Erasing the contents of the error buffer. Select the CLEAR ERRORS menu item and press the MENU RIGHT key. The
content of the error buffer is cleared.
The functionality of the OPTIONS and ALIGNMENTS (TUNER, WHITE TONE, GEOMETRY and SMART SETTING) sub
menus is described in the service adjustments.
Error code buffer and error codes
Explanation of the Error code buffer
The error code buffer contains all errors detected since the last time the buffer was erased. The buffer is written from left to
right. When an error occurs that is not yet in the error code buffer, the error code will appear at the left side and all other
errors shift one position to the right.
The error code buffer will be cleared in the following cases:
•
by activating CLEAR ERRORS in SAM menu
•
exiting SDM or SAM with the “Standby" command on the remote control