Philips 7592, Руководство по обслуживанию

Страница: 43 / 323

Geometry Adjustment
The geometry alignments menu contains 13 items for correct picture geometry alignment. In widescreen models, the
GEOMETRY SW is available for separate alignments of the superwide (panorama) mode. The geometry alignments are:
Initial set-up:
•
Press the PICTURE button on the remote control repeatedly to change the Smart Picture setting to "SPORTS."
•
Enter SAM (see Software alignments (Service Alignment Mode)).
•
Press the Menu Down button to select the GEOMETRY menu item.
•
Press the Cursor Right button to enter the GEOMETRY submenu.
•
Press the Cursor Down button to highlight the VER-SCOR submenu item.
•
Use the Cursor Right buttons to adjust VER-SCOR to 13 for 27”, 28”, 32” and 34” picture tubes.
•
Use the Cursor Right buttons to adjust VER-SCOR to 23 for 29” RF- sets
•
Vertical zoom should be set at a default value of 35.
•
Vertical scroll should be set at a default value of 32.
VER-SCOR aligns the vertical linearity, so that the vertical intervals of the grid-patterns are the same over the entire height of
the screen.
Extra Alignment for 4:3 sets
•
Set Service blanking on SERV-BLK ON
•
Adjust Vertical slope VER-SLOPE xx
•
Set Service blanking OFF SERV-BLK OFF
General Alignment (4:3 set)
•
Adjust Vertical amplitude VER-AMPL xx
•
Adjust Vertical shift VER-SHIFT xx
•
Adjust Horizontal shift HOR-SHIFT xx
•
Adjust Vertical height VER-ZOOM xx
•
Adjust Vertical position VER-SCROLL xx
•
Adjust Vertical linearity VER-SCOR xx
•
Not used H60-SHIFT xx
•
Not used V60-AMPL xx
•
Adjust Horizontal width EW-WIDTH xx
•
Adjust Parabola EW-PARA xx
•
Adjust Up corner EW-UCORN xx
•
Adjust low corner EW-LCORN xx
•
Adjust Trapezium EW-TRAP xx
•
Adjust Horizontal parallelogram HOR-PARALLEL xx
•
Adjust Horizontal bow HOR-BOW xx