33
User Profiles
9.User Profiles
Your mobile phone comes with various user profiles
for you to set your mobile phone’s ring tone
according to the environment.
General
: For use under general circumstances.
Meeting
: For use in meetings. This requires
presetting (for example, Alert Type set to
Vibration Only).
Outdoor
: For use when outdoor. For example,
you can set a higher volume for the earpiece and
the ring tone.
Indoor
: For use when indoor.
Headset
: For use when using the headset. It will
be activated automatically when you insert the
headset into your mobile phone. For example,
you can set a lower volume for the earpiece and
the ring tone.
Bluetooth
: When you have successfully connected
the bluetooth headset.
These six profiles have already been set and the
default profile is “General”. In idle mode, long
press [*] key to quickly turn silent mode on or
off.
Press the up/down keys to scroll and select the
required profile, then press the left soft key
Option
to carry out the following operations:
Activate
: Activate the selected profile.
Customize
: Customize the selected profile. Press the
left soft key
OK
to display the following menu:
Tone Setup
: Customize different ring tones with
different options, for example, Incoming Call,
and so on.
Power on and Power off tone cannot be changed.
Volume
: Two types of volume can be set;
Ring
Tone
(including incoming call, alarm, power on,
power off, message tone) and
Key Tone
(associated
with key presses).
Alert Type
: This option allows you to set the alert
type. You can select only one option from Ring,
Vibration Only, Vibra and Ring and Vibra Then Ring.
Ring Type
: This option allows you to set the ring
type --
Single
,
Repeat
or
Ascending
.
Extra Tone
: You can turn the tone On or Off as
follows: Warning, Error, Camp on and Connect.
Answer Mode
: You can select different modes of
answering:
Any Key
(except for the Power Supply
key, Right Soft key) and
Automatic
(available only
when the headset is inserted).
P699_EN
8/23/07, 5:17 PM
34