Philips 65HFL7111T, Руководство пользователя

Страница: 18 / 102

5
Switching On and
Off
5.1
On, Standby or Off
Make sure the TV is connected to the mains AC
power. Connect the supplied power cord to the
AC
in connector at the back of the TV. The indicator light
at the bottom of the TV lights up.
Switch on
Press  on the remote control to switch the TV
on. Alternatively, press  HOME . You can also
press the small joystick key on the back of the TV to
switch the TV on in case you can't find the remote
control or its batteries are empty.
Switch to standby
To switch the TV to standby, press  on the remote
control. You can also press the small joystick key on
the back of the TV.
In standby mode, the TV is still connected to the
mains power but consumes very little energy.
To switch off the TV completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.
5.2
Word mark brightness
You can switch off or adjust the brightness of the
Philips logo on the front of the TV.
To adjust or switch off…
1 - Consumer Mode:
On  Press  HOME and select Features and
press OK .
Guest Mode: On  Guest Menu:
Press  HOME and select Features and
press OK .
(For professional mode information, please refer to
Installation manual)
2 - Select Eco Settings > Philips Wordmark and
press OK .
3 - Select Maximum , Medium , Minimum or select Off
to switch off the lighting of the word mark.
4 - Press  BACK , repeatedly if necessary, to close
the menu.
*Only available for certain TV models
5.3
Keys on TV
If you lost the remote control or its batteries are
empty, you can still do some basic TV operations.
To open the basic menu…
1 - With the TV switched on, press the joystick key on
the back of the TV to bring up the basic menu.
2 - Press left or right to select  Volume, 
Channel or  Sources.
3 - Press up or down to adjust the volume or tune to
the next or previous channel. Press up or down to go
through the list of sources, including the tuner
selection.
4 - The menu will disappear automatically.
To switch the TV on standby, select  and press the
joystick key.
18