55BDL1005X
36
How to setup the settings in the menu
to control all the monitors at the same
time and individually via RC?
Daisy chained by RS232 and no IR cable
1. The first display sets as “Primary” on OSD (Advanced
option/IR control item), others set as “Secondary”.
2. The setup OSD will show on Top-Left of display.(Toggle
MENU will show again if it disappear)
3. Default setting: ID NO: 0, GP NO: 0, this setting can
control all displays by IR.
The “+”, “-” can change “ID NO” to control signal
display by “Monitor ID”.
The “UP”, “DOWN” can change “GP NO” to control
multi-display by “Group ID”.
*The first display always be controlled by IR.
How is the RC working?
Daisy chain : no RS232 connected and IR cable
No need setting, just to connect with IR cables and
control by IR.
*This way has out-of-synchronizm phenomenon. Suggest
to use above setting with RS-232 cable.
