EN-14
Use your TV in digital
5
mode
Get Started
5�1
When the TV is powered-on for the first
•
time you will be prompted to run auto
installation to receive the channels that are
broadcasted locally.
This process may take 10 to 20 minutes
•
depending on the number of channels that
are transmitted by the cable provider or
broadcaster.
When the TV is not receiving any signal
•
from the antenna or cable, “
No signal
”
will appear on the TV screen. This can be
caused by the antenna or cable not being
plugged in correctly.
When no transmission is received from
•
the broadcaster, “
No channel available
(TV)
”
or
“
No channel available
(Radio)
” will appear on the TV screen.
You will not be able to watch pay channels
•
when using direct antenna/cable connection
to the television. “
Signal is currently
scrambled
” will appear on the TV screen.
When the set-top box is connected to the
•
television using coaxial cable, it is necessary
to auto-program the television for the set-
top box source channel and change the
channels at the set-top box to view the
program.
When the set-top box is connected to
•
the television using AV connection, select
the television input source for the set-top
box to view the program and change the
channels at the set-top box to view the
program.
Prepare TV for digital
5�2
services
Scrambled digital TV channels can be decoded
with a Conditional Access Module inserted
with a Smart card (CAM) provided by a digital
TV service operator.
The CAM may enable several digital services,
depending on the operator and services
you choose (for example, pay TV). Contact
your digital TV service operator for more
information about services and terms.
Using the Conditional Access
5�2�1
Module
WARNING
B
Switch off your TV before inserting a CAM.
Be sure to follow the instructions described
below. Wrong insertion of a CAM may
damage both the CAM and your TV.
Following the directions printed on the
1.
CAM, gently insert the CAM into the
COMMON INTERFACE
slot on the
side of the TV.
HDMI 2
CVI
AV IN
AV OUT
VIDEO
L
R
L
Pr
Pb
Y
R
L
AUDIO IN
SERV. C
VGA
R
L
R
VIDEO
HDMI 1
TV ANTENNA
75X
SE
R
V.
U
Push the CAM in as far as it will go.
2.
HDMI 2
CVI
AV IN
AV OUT
VIDEO
L
R
L
Pr
Pb
Y
R
L
AUDIO IN
SERV. C
VGA
R
L
R
VIDEO
HDMI 1
TV ANTENNA
75X
SE
R
V.
U
Turn on the TV and wait for the CAM to
3.
be activated. This may take several minutes.
