19
S
OUND
M
ENU
C
ONTROLS
Using the Sound Menu Control
T
o adjust your TV sound, select and use the
Sound Menu Controls listed below:
1
Treble: Press the CURSOR
q
q
or
p
p
buttons to
adjust the control. The control will enhance the high
frequency sounds.
2
Bass: Press the CURSOR
q
q
or
p
p
buttons to
adjust the control. The control will enhance the low
frequency sounds.
3
Balance: Press the CURSOR
q
q
or
p
p
buttons to
adjust the level of sound coming from the left and
right speakers.
4
AVL: (Auto Volume Leveler) Press the CURSOR
q
q
or
p
p
buttons to turn the control On or Off. When
On, AVL will level out the sound being heard when
sudden changes in volume occur during commercial
breaks or channel changes.
5
Incr. Surround: Press the CURSOR
q
q
or
p
p
buttons to select between Dolby Virtual or Stereo
settings (If Stereo), or select Spatial or Mono (If
Mono).
For Analog Mode Only:
6
SAP: Press the CURSOR
q
q
or
p
p
buttons to
toggle this control to On or Off. SAP is short for
Secondary Audio Programming and is sent as a third
audio channel, a SAP signal can be heard apart from
the current TV program sound.Note: If SAP is not
present on a selected show No SAP will appear on
the screen.
7
Stereo: Press the CURSOR
q
q
or
p
p
buttons to
select between Stereo or Mono settings. Note: If
Stereo is not present on a selected show and the TV
is placed in the Stereo mode, the sound coming from
the TV will remain in the Mono mode.
8
Alt Audio Program: Press the CURSOR
q
q
to
select the appropriate language.
For Digital Mode Only:
9
Bass Boost: Press the CURSOR
q
q
or
p
p
buttons
to toggle this control to On or Off. The Bass Boost
control allows you to increase the low-frequency
range of the TV’s sound. This creates a deeper,
fuller sound.
To switch between Digital and Analog channels, use
the A/D button on the Remote Control.
H
ELPFUL
H
INT
* Manufactured under license from Dolby Laboratories. “Dolby” and
the double-D symbol
£
are trademarks of Dolby Laboratories.
