EN 16
7 Set Channels
For the first time setup, the system will remind
you to select network connection or TV channel
installation. The Section provides the instructions
on how to reinstall and fine-tune channels.
Automatic Channel Searching
1.
Press key.
2.
Select Channel > Channel Settings and then
press
OK
key.
3.
Press
OK
key to begin automatic channel
searching.
Note
This function can be used only in TV
mode.
Manual Channel Setting
Step 1 Select System
1.
Press key.
2.
Select Channel > Analog channel manual
installation.
3.
Choose to begin scanning and fine-tuning.
Note
Frequency fine-tuning can be performed
only when the source is ATV.
Step 2 Search and Store New Channels
1.
Press key.
2.
Select Channel > Analog channel manual
installation > Begin Scanning.
You can directly input the channel
frequency.
Choose to Scan and then press
OK
key
to begin scanning.
3.
Upon searching completion, select Save to
quit the current interface.
Save the searched channels.
Step 3 ATV Fine Tuning
1.
Press key.
2.
Select Channel > Analog channel manual
installation > Fine-tuning.
3.
Select Decrease or Increase to adjust the
frequency.
Search Digital Channels
1.
Press key.
2.
Select Channel > Digital channel manual
installation and then press
OK
key.
3.
Directly input the channel frequency
4.
Choose Scan and then press
OK
key to
begin scanning.
Содержание 49PUT7032/56
Страница 1: ......
