7-3
PL17.06-A_FW
FIRMWARE RENEWAL MODE
[55PFL5922/F7]
Equipment Required
a. USB storage device
b. Remote Control Unit
Firmware Update Procedure
1. Turn the power off and unplug the AC Cord.
2. Insert the USB storage device to the USB port as
shown below.
3. Plug the AC Cord and turn the power on.
4. Press the [MENU] button on the remote control
unit.
5. Select “Update software” and press the [OK]
button on the remote control unit.
6. Select “USB” and press the [OK] button on the
remote control unit to enter the update mode.
Update file selection screen appears as follows.
(Files included in the USB storage device are
displayed.)
Note:
To cancel the update mode, select “Cancel”
and press the [OK] button.
7. Select the file and press [OK] button.
8. The update will start and the following will appear
in the screen.
Note:
If the above screen isn’t displayed, repeat
from step 1.
9. Select “Yes” and press the [OK] button to update.
Note:
Do not remove the USB storage device or
turn the TV off while update is in progress.
10. When the firmware update is completed, the
following will appear in the screen.
Remove the USB storage device from the USB
port.
TV reboots automatically.
Re
a
r C
ab
inet
(ex
a
mple)
U
S
B port
U
S
B
s
tor
a
ge
device
"*" differs depending on the models.
Select a file
Software update
Cancel
***-*****_***_*.upg
1
3
2
4
"*" differs depending on the models.
Current Version
New Version
Are you sure you want to update?
Software update
No
Yes
***-*****_***_*
***-*****_***_*
1
3
2
4
Update required
Hang on while we fetch the update 100%
Be right back
‘**********’ needs to reboot to apply an update.
