43BDL4051T
12
1. In the content of the web page, move the focus up to the next
clickable items.
2. Move the focus up to the next control or widget such as buttons.
1. Navigate through menus and choose items.
2. In the content of the web page, these buttons are to control the
scroll bar of the screen. Press
or
is for moving vertical scroll
bar up or down. Press
or
is for moving horizontal scroll
bar left or right.
3. For PDF files,
»
when zoom in/out has been performed,
Press
,
,
or
to adjust the position of the screen.
»
when zoom in/out has been not performed,
Press
to go to the next page.
Press
to go to the previous page.
Confirm an entry or selection.
1. In the content of the web page, move the focus down to the next
clickable items.
2. Move the focus down to the next control or widget such as buttons.
Press to turn the mute function on/off.
The button is only controlled by Scalar.
1.
: No function on Android source. These two buttons
are only controlled by Scalar.
2. For PDF files,
press
button to perform zoom-in;
press
button to perform zoom-out.
After zoom-in or zoom-out, press
button to revert the pdf file
to the original size.
1. No functions for ID SET
and ENTER
on Android
source. These buttons are only controlled by Scalar.
2. For PDF file, enter the page number by pressing number buttons
and then press
button to jump to the specific page.
Change picture format. The button is only controlled by Scalar.
Return to the previous page or exit from the previous function.
1. Display information about current input signal. It is shown by Scalar.
2. Media Player -> Compose -> edit or new add playlist -> choose any media files -> press
to show the information of the chosen media file.
Open toolbox in Media Player or PDF Player.
1. Media Player ->Compose -> Edit or new add playlist -> press
to open toolbox. Toolbox will be slide from the left side of the screen.
2. PDF Player ->Compose -> Edit or new add playlist -> press
to open toolbox. Toolbox will be slide from the left side of the screen.
Adjust volume. The buttons are only controlled by Scalar.
2.3.4. Inserting the batteries in the remote control
The remote control is powered by two 1.5V AAA batteries.
To install or replace batteries:
1. Press and then slide the cover to open it.
2. Align the batteries according to the (+) and (–) indications inside the
battery compartment.
3. Replace the cover.
