7
1.6. Mounting in Portrait Orientation
This display can be installed in portrait position.
1. If the table stand is attached, remove it first.
2. Rotate the display counter-clockwise by 90°. The “
” logo should be on the RIGHT side when facing the display.
90
90
1.6.1. How to remove the logo
1. Prepare a piece of paper with a cutting area of logo as a protector to
prevent the front bezel from scratching.
2. Use a knife and carefully remove the logo sticker with the paper placing
beneath.
3. Tear off the logo sticker.
1
2
3
NOTE: We recommend you contact a professional technician when installing the display on a wall. We are not responsible for any damage to the
product if the installation is not performed by a professional technician.
