Philips 42PFL5556/V7, Руководство по обслуживанию

Страница: 24 / 234

! 24
Change TV preferences
1 Press .
2 Select [Setup] > [TV settings] > [Preferences].
3 Select one of the following, then press OK.
• [Menu language]: Select a menu language.
• [Sleep timer]: Switch the TV to standby after a pre-defined duration.
• [Location]: Optimise TV settings for your location - home or shop.
• [E-sticker]: (For shop mode only) Switch the e-sticker on or off.
• [Volume bar]: Display the volume bar when you adjust the volume.
• [Auto switch off]: To conserve energy, set the TV to switch off automatically after a period of inactivity.
• [Channel information size]: Change the type of information that is displayed when you switch channels.
• [Key beep]: Enable audio feedback when you press buttons on the remote control or TV.
• [TV position]: Apply the best settings for your TV based on how it is mounted.
• [Clock]: Display or remove the time from the TV, and set clock options.
Start a TV demo
You can use demonstrations to better understand the features of your TV. Some demos are not available on certain
models. Available demos are displayed in the menu list.
1 While you watch TV, press .
2 Select [Setup] > [Watch demo], OK.
3 Select a demo and press OK to view it.
Reset the TV to factory settings
You can restore the default picture and sound settings of your TV. The channel installation settings remain the same.
1 Press .
2 Select [Setup] > [TV settings] > [Factory settings], then press OK.
3 Enter the PIN code(with a default value of 8888) select RESET, press OK to start resetting previous settings.
Reinstall the TV
You can reinstall the default settings of your TV. All the changed settings will reset.
1 Press .
2 Select [Setup] > [TV settings] > [Reinstall TV], then press OK.
3 Enter the PIN code(with a default value of 8888) select Start Now , press OK to start reinstalling the TV settings.
6 Install channels
The first time you set up your TV, you are prompted to select a menu language and to install TV Afterwards, you can
re-install and fine tune channels.
Automatically install channels
1 Press
2 Select [Setup] > [Search for channel], then press OK.
Manually install channels
Step 1 Select your system
Note•
•Skip this step if your system settings are correct.