EN-8
Step 2 Remove the TV stand
Note
D
These instructions are only applicable to
TV models with mounted stands. If your TV
stand is not mounted, skip to
Step 3 Connect
cables
.
Carefully place the TV face down on a
1.
flat, stable surface that is covered by soft
cloth. The cloth should be thick enough to
protect your screen.
Using a cross-head screwdriver (not
2.
supplied), unscrew the four screws that
secure the stand to the TV.
Firmly pull the stand from the bottom of
3.
the TV. Place both the stand and screws in a
secure location for future reinstallation.
Step 3 Connect cables
Connect the antenna cable, mains cord and
all other devices to the back of the TV as
described in the following sections and in
Section 7 Connect devices
.
Step 4 Secure the VESA-compatible wall
bracket to the TV
WARNING
B
Use bolts (M6 for 32 inch models, M8 for
all other models) and spacers to secure the
VESA-compatible wall bracket to your TV.
Note
B
Depending on your VESA-compatible wall
bracket, you may need to separate the
mounting plate from the wall bracket for
easier installation. Refer to your VESA-
compatible wall bracket documentation for
instructions.
Locate the four mounting nuts at the back
1.
of the TV.
