22
This system remote control operates the following Philips equipment:TV,VCR,
DVD, DVD/R, SAT (RC5/RC6), AMP (+TUNER), CD, CD/R.
Press the
Select
key to operate any of the equipment indicated in the display
(
AUX
= CD;
DVD/R
= DVD,
SAT
= SAT (RC5). Another device can be selected by
pressing
Select
repeatedly within 2 seconds.The led will blink slowly to indicate
the device.
Press one of the keys on the remote control to operate the peripheral equipment.
To return to TV mode press
Select
while the led is blinking.
When no action is taken within 60 seconds, the remote goes back to
TV
mode.
When you do not want the remote to go back to TV mode, and to stay in the
mode selected, proceed as follows:
Select the desired mode with the
Select
key.Wait until no LED is lit. Press the
Select
key again simultaneously with the
OK
key for at least 2 seconds.The remote
will not go back to TV mode from now on and will remain in the mode selected.
To go back to the default setting of the remote (TV mode) repeat what is explained
above, selecting the TV mode.
Note: When the
Select
key is pressed and held for more than 2 seconds, the RC5/RC6
system select command is transmitted.
b
¬
+
-
V
+
-
v
b
i
0
h
q
Select
1
2
3
4
5
6
7
8
9
0
Ò
®
‡
π
†
S
®
®
®
®
æ
B
P
AMP DVD/R TV SAT AUX
MENU
MODE
ON/OFF
Ambilight
®
º
Active Control
OK
®
B
to switch to standby
º
æ
for pause (
VCR
,
DVD
,
CD)
RDS news/TA (
AMP
);
to shuffle play (
CD/R
)
®
for record
Ò
for rewind (
VCR
,
CD
);
search down (
DVD
,
AMP
)
‡
for stop
π
for play
†
for fast forward (
VCR
,
CD
);
search up (
DVD
,
AMP
)
S
for pause (
CD/R
)
b
RDS display (
AMP
);
to select your choice of subtitle
language (
DVD
);
i
display information
MENU
to switch the menu on or off
- P +
for chapter, channel, track
selection
0 to 9 digit entry
0
tape index (
VCR
),
select a DVD title/chapter,
select a frequency (
AMP
)
U
VCR timer
cursor up/down
to select the next or the
previous disc (
CD)
cursor left/right
to select the previous or
following track (
CD
)
search up/down (
AMP
)
Additionally the
DVD/R
,
SAT
and
AUX
indicator
can be programmed to operate the DVD-R, DVD +
receiver, DVD-R + receiver, SAT (RC6), CD-R and
VCR instead.
&
Select
TV
with the
Select
key.
é
To program
• DVD-R
, press the
OK
key + digit 2;
•
SAT (RC6)
, press the
OK
key + digit 4;
•
CD-R
, press the
OK
key + digit 6;
•
DVD
+
receiver
, press the
OK
key + digit 7;
•
DVD-R
+ receiver
, press the
OK
key + digit 8;
•
VCR
, press the
OK
key + digit 9.
“
Select the corresponding
DVD/R
,
SAT
,
AUX
indicator.The remote control will operate your
DVD-R, DVD or DVD-R in combination with a
receiver (
DVD/R
), SAT (RC6) (
SAT
), CD-R or
VCR (
AUX
).
Note: To return to the modes programmed in the
factory, either remove the batteries for a few
minutes, or press the
OK
key + digit 1 (DVD
mode); or + digit 3 (SAT-RC5) or + digit 5 (CD
mode).
Audio- and video equipment keys
