Mechanical instructions
GB 11
FTV1.9DE
4.
4.2.2
Exchanging of a LOUDSPEAKER.
1.
First unplug (remove Mains and VGA cable) the Display
Box.
2.
Remove front cover (for a description see Chapter 1.1.8
'LED DISPLAY panel').
Figure 4-13
1.
The LOUDSPEAKER can now be removed by
disconnecting its cable and removing the 4 fixation screws
at the top and bottom of the speakerbox. Be sure to remove
the correct screws, otherwise the speaker system will be
damaged (it is an airtight system).
4.2.3
Exchanging of the PDP.
1.
First unplug (remove Mains and VGA cable) the Display
Box.
2.
Place the rear side of the Display Box on a foam cushion
(be sure the metal rear cover is mounted in order to prevent
damaging of the electronic panels).
3.
Remove front cover (for a description see Chapter 1.1.8
LED DISPLAY panel).
4.
Now the GLASS PLATE can be removed by unscrewing all
screws and removing all glass clips (for a description see
Chapter 1.2.1. 'Exchanging of the GLASS PLATE').
Figure 4-14
1.
Remove all copper EMC SHIELDING springs mounted
around the display [6].
2.
Now flip the complete Display Box and place it with the
Plasma Display down on a foam cushion. Be 100 % sure
a large foam cushion is placed underneath the PDP, as it
will drop about 10 mm after removing its fixation screws ! !
3.
Disassemble metal rear cover (for a description see
Chapter 1.1 'Introduction').
Figure 4-15
1.
Disconnect the following cables:
–
Cables coming from connectors CN23 and CN24 of the
PDP DISPLAY panel [3] (for easiest access lift the
PDP DISCHARGE panel from its fixations [2]).
–
Flat cable on connector PD3 of the PDP LIMESCO
panel [4]. Also remove the ferrite 'flat cable shield'
completely by unlocking its fixations [5].
Figure 4-16
1.
Now remove the 8 large screws which hold the PDP:
–
4 screws are located at the top: they also hold the
aluminium wall mount [1].
–
The other 4 are located at the bottom: the 2 outer
screws are hidden behind panels. Therefor unscrew
the VS/VA SUPPLY and the PDP-LIMESCO panel
(grey panels) [2].
2.
Lift encasing from PDP and replace PDP [3].
CL 96532069_143.EPS
120899
3
3
3
3
4
4
CL 96532069_144.EPS
120899
6
CL 96532069_145.EPS
120899
1
4
5
3
2
3
FD173
FD171
PDP Discharge
PDP Limesco
PD3
CN24
CN23
FOAM CUSHION
CL 96532069_146.EPS
120899
1
1
1
1
2
2
2
3
2
www.freeservicemanuals.info
3/2/2013
www.nostatatech.nl
World of free manuals