Philips 411EXP, Руководство по обслуживанию

Страница: 4 / 40

1-3
GENERAL INFORMATION
MP3 music files
The music compression technology MP3 (MPEG Audio Layer 3) reduce the
digital data of an audio CD significantly while maintaining CD-like sound
quality. With MP3, for example, you can record up to 3 hours of CD-like music
on a single CD-ROM. This set plays MP3 music files.
How to get music files
Either download legal music files from the Internet to your computer disk
or buy pre-recorded music CD. For this, insert an audio CD into
your computer´s CD-ROM drive and convert the music using an appropriate
encoder software. To achieve a good sound quality, a bit rate of 128 kbps or
higher is recommended for MP3 music files.
Some encoder software offers an option to protect music files, i. e. the files
can only be played on the computer which created them. If you burn such files
on a CD-ROM, you cannot play them on this set. Make sure to deactivate the
protection option in the encoder software before creating the music files. In
this case you are responsible for adherence to all local or international
copyrights.
How to organize music files
In order to easily handle the large number of music files on a CD-ROM, you
can organize them in folders (“albums”).
The tracks of an album will be played in alphabetical order. If you want to
arrange them in a certain order, let the file names start with numbers.
For example:
001 -ONEWORLD.MP3
002 -FIRESTARTER.MP3
003 -DEEP.MP3
GENERAL INFORMATION
This set will play all albums in
alphabetical order. An album name
includes all folders in which the album is
located, e. g. the album VERDI in
CLASSIC has the album name
CLASSIC\VERDI.
The albums in the illustration will be
played in the following way:
C LASSIC 1
C LASSIC\MOZART 2
C LASSIC\VERDI 3
P OP\BLUR 4
R EGGAE 5
In POP there are no MP3 files. POP is
therefore skipped.
There may be an album 0 which will be
played before all other albums. Album 0
contains all tracks which you did not put
into an album.
How to make a CD-ROM with MP3
Record (“burn”) the music files from your hard disc on a CD-ROM
with your computer´s CD burner.
Make sure that the file names of the MP3 files end with mp3 .
When burning your MP3-CDs, use either ISO 9660 disc format or UDF.
CD burning software like “DirectCD” or others support the UDF format.
ALBUM
POWER SUPPLY/HEADPHONES
Average battery lifetime of 1 alkaline battery ,type AA (LR6, UM3):
Playback of Audio disc MP3-CD
ESP off (power-saving mode) 6 hours 5 hours
ESP on 6 hours 3 hours
Notes:
–Power-saving mode doubles your playtime.
–20 seconds after pressing
9
, the display switches off. After 90 seconds
the set switches off automatically.
POWER SUPPLY
Mains adapter
Only use the AY 3170 mains adapter (4.5 V/300 mA
direct current, positive pole to the center pin). Any
other product may damage the set.
1 Make sure the local voltage corresponds to the
adapter´s voltage. If your mains adapter is equipped
with a voltage selector, set this selector to the local
mains voltage if necessary.
2 Connect the mains adapter to 4.5V DC on the set and to the wall outlet.
Note: Always disconnect the adapter if you are not using it.
HEADPHONES
Headphones (SBC HE205)
• Connect the supplied headphones to LINE OUT/ p .
Note: LINE OUT /
p
can also be used for
connecting this set to your HiFi system.To adjust the
sound and volume, use the controls on the connected
audio equipment and on the CD player.
5 REGGAE
.mp3
4 BLUR
.mp3
3
VERDI
.mp3
POP
2 MOZART
.mp3
1 CLASSIC
.mp3
.mp3
GENERAL INFORMATION
Supported formats
This set supports:
– Disc format: ISO 9660, Joliet, Multisession, UDF, Enhanced Music CD,
Mixed Mode CD
– Music file format: MP3
MP3 bit rate (data rate): 32–320 kbps and variable bit rate
–Total number of music files and albums: around 350
(with a typical file name length of 20 characters)
Note: The number of music files that can be played depends on the
length of the file names. With short file names more files will be
supported.
Visit the
E
X
PANIUM
homepage
http://www.expanium.philips.com
All trademarks used are owned by their respective owners.
POWER SUPPLY
Battery (not supplied)
Inserting battery
• Open the battery compartment and
insert 1 alkaline battery of type AA (LR6, UM3).
• Remove battery if it is empty or if the set will not
be used for a long time.
Indication of empty battery
• Replace the battery or connect the mains adapter as
soon as blinks and
batt
is displayed.
Batteries contain chemical substances, so they
should be disposed of properly.
A
INSTRUCTIONS FOR USE