11
EN
a
Wall jack
1/4 inch phone jack used in the healthcare TV setup.
b
1/4 inch phone plug
1/4 inch phone plug that is plugged into the 1/4 inch phone
jack used in the healthcare TV setup.
c
Pendant control/ pillow speaker
A device used in healthcare facilities for bedside TV control
and audio. It contains a built-in speaker and some keys
for basic TV functions such as power, channel up/ down,
volume, etc.
d
PENDANT
1/8 inch mini-jack connection to a healthcare pendant
control (also known as pillow speaker).
e
1/8 inch phone plug
1/8 inch phone plug that is plugged into the 1/8 inch mini
phone jack, (the pendant interface) on the TV.
f
1/4 inch phone plug
1/4 inch phone plug that is plugged into the 1/4 inch phone
jack used in the healthcare TV setup.
g
Adaptor cable
A three feet adaptor cable used to connect 1/4 inch phone
plug and 1/8 inch phone plug.
CAUTION
INSTALLER
THIS PRODUCT IS NOT PROVIDED WITH A PENDANT
CONTROL; HOWEVER, IT IS EXPECTED THAT THIS INSTITUTION
(OR HOSPITAL) WILL PROVIDE ONE FOR ATTACHMENT TO
THE APPROPRIATE RECEPTACLE ON THE PRODUCT. AS PART
OF THE INSTALLATION, EXAMINE THE PENDANT CONTROL
TO DETERMINE WHETHER A MARKING SIMILAR TO THE ONE
BELOW APPEARS ON IT: ‘CAUTION - RISK OF FIRE IF USED IN
OXYGEN-ENRICHED ATMOSPHERE - RETURN TO HOOK OR
HOLDER AFTER USE.’ IF THE ABOVE NOTICE IS NOT PROVIDED
ON THE PENDANT CONTROL, REMOVE THE LABEL PROVIDED
WITH THESE INSTRUCTIONS AND ATTACH IT TO THE
PENDANT CONTROL.
Use the analog pendant control
The analog pendant or the pillow speaker provides a built-in
speaker, a volume control, and one dual purpose button that is
used to select the channels and power the TV on/ off.
TV
SPEAKER
POWER/ C/-
VOLUME
1
Turn on the TV by connecting it to the AC mains power
outlet.
2
Press
TV
on the pendant control.
»
If the
TV
is in standby mode, the TV is turned on.
»
If the
TV
is already turned on, the channel that is next
to the current channel is displayed.
3
To power off the TV, press
TV
on the pendant control
and continue to press it until the channel number
increments four times.
»
The TV powers off after the fourth channel increment.
Note
•
Picture shown are for illustrative purposes only.
•
Analog controls can exhibit a relatively slow response time to channel
commands. This is normal and not indicative of any system problems.
Use the digital pendant control
The digital pendant or the pillow speaker provides a built-in
speaker, a volume control, and dedicated buttons to perform
different functions.
CHANNEL
CHANNEL
CHANNEL
ON
OFF
GUIDE
SPEAKER
POWER ON/ OFF
CHANNEL UP
CLOSE CAPTION
CHANNEL DOWN
CHANNEL GUIDE
VOLUME
1
Turn on the TV by connecting it to the AC mains power
outlet.
2
Press
POWER ON/OFF
on the digital pendant control to
turn the TV on, if it is in standby mode.
3
Press one of the following:
•
CHANNEL UP:
To watch the channel that comes after the
current channel.
•
CHANNEL DOWN
: To watch the channel that comes before
the current channel.
•
CLOSE CAPTION:
To enable or disable close caption.
•
CHANNEL GUIDE:
To display the channel guide.
•
VOLUME:
To increase or decrease the volume.
4
Press
POWER ON/OFF
to turn the TV off.
