Philips 40HFL5011T/12, Руководство по обслуживанию

Страница: 11 / 74

Mechanical Instructions EN 11 TPM16.4HE LA 4.
2016-Jun-03
back to
div.table
4.2 Service Positions
For easy servicing of a TV set, the set should be put face down
on a soft flat surface, foam buffers or other specific workshop
tools. Ensure that a stable situation is created to perform
measurements and alignments. When using foam bars take
care that these always support the cabinet and never only the
display. Caution: Failure to follow these guidelines can
seriously damage the display!
Ensure that ESD safe measures are taken.
4.3 Assembly/Panel Removal
Instructions below apply to the 32HFL5011T/12, but will be
similar for 40" models.
4.3.1 Rear Cover
Refer to Figure 4-3 for details.
Warning: Disconnect the mains power cord before removing
the rear cover.
1.
Remove fixation screws [1] that secure the base assy, pull
out the base assy from the set. Then remove the fixation
screws [2],[3],[4] that secure the rear cover &
service_cover. Refer to
Figure 4-3 for details.
2. Gently lift the service_cover from the TV. Then unplug the
connector [5] that connect with SSB. Refer to
Figure 4-4 for
details.
3. Gently lift the rear cover from the TV. Make sure that wires
and cables are not damaged while lifting the rear cover
from the set.
Figure 4-3 Rear cover removal
Figure 4-4 Rear cover removal 1
4.3.2 Keyboard Control unit
1. Unplug the connector [1] form the keyboard control panel.
2. Then remove the fixation screws [2] that secure the
keyboard control panel. Refer to
Figure 4-5 for details.
3. Gently take the keyboard out.
When defective, replace the whole unit.
20000_102.eps
1
1
2
2
1 1
2
2
2
2
3
4
M3 × 6
2
1
3
Q3 × 8
4
2
3
4
2
2
2 2
2
M4 × 14
M3 × 6
20000_103.eps
5