English
37
n
Headphone
4
Insert the plug into the headphone socket
n
at the front of the TV.
4
Press
c
on the remote control to switch off the internal loudspeakers of
your TV.
The headphone socket has an impedance of between 8 and 4000 Ohm and is of
the 3.5 mm jack type.
In the
SOUND
menu select Headphone to adjust the headphone volume and
balance and to select the audio source for your headphone sound.
See page 17.
Extra loudspeakers
You can replace the left and right internal loudspeakers of your set by two
extra loudspeakers, min. 8 Ohm.
4
Connect the loudspeakers to the connector clips at the back of the TV.
4
Push the connector clip down and insert the ends of the wires into the
openings :
the negative wires to the black connector clips, the positive wires (the one
with a black line) to the red connector clips.
Do not insert the wires too far.
4
Connect the front left loudspeaker to
FRONT L
and the front right loudspeaker
to
FRONT R
.
4
Put the loudspeaker switch on the back in the
c
position.
5
The internal right and left loudspeakers of your TV are now switched off.
R
REAR
FRONT
L
8
mm
