Philips 32PW8907, Руководство пользователя

Страница: 27 / 36

27
Connect Peripheral Equipment
Connect Peripheral Equipment
There is a wide range of audio and video equipment that can be connected to your TV.
The following connection diagrams show you how to connect them.
Recorder
If the eurocable
3
is not used the
following steps are required:
Search for and store the test signal of
the recorder
&
Unplug the aerial cable
1
from the aerial
socket
x
of your recorder.
é
Switch on your TV and put the recorder
on the test signal.
(See the handbook for your recorder.)
“
Search for the test signal of your recorder
in the same way as you searched for and
stored the TV signals. See Installation, Store
TV channels, Manual installation, p. 7.
‘
Store the test signal under programme
number 0 or between 90 and 99.
(
Replace the aerial cable in the aerial socket
x
of your recorder after you have stored
the test signal.
Decoder and recorder
Connect a eurocable
4
to your decoder
and to the special euroconnector of your
recorder. See also the recorder handbook.
See Decoder, p. 11.
You can also connect your decoder directly
to
EXTERNAL 1
or
2
with a eurocable.
CABLE
1
4
2
EXT.
2
3
Connect the aerial cables
1
,
2
and, to
obtain the optimum picture quality, eurocable
3
as shown.
If your recorder is provided with the EasyLink
function, the eurocable supplied with it should be
connected to
EXTERNAL 2
to benefit from the
EasyLink functionality.
(except Digital Sources)
Recorder and other peripherals
CABLE
1
2
1
EXT.
2
4
5 3
&
Connect the aerial cables
1
,
2
and
3
as shown.
Better picture quality can be obtained if you also
connect eurocable
5
to
EXTERNAL 2
and a eurocable
4
to
EXTERNAL 1
or
EXTERNAL 3
.
é
Look for the test signal of your peripheral in the same
way as you do for a recorder.
When a recorder is connected to
EXTERNAL 1
you can only
record a programme from your TV.
Only when a recorder is connected to
EXTERNAL 2
it is
possible to record a programme from your TV as well as
from other connected equipment.
See Record with your recorder, p. 32.
Note:
EXTERNAL 1
can handle CVBS and RGB,
EXTERNAL 2
CVBS and Y/C,
EXTERNAL 3
CVBS and RGB. It
is preferred to connect peripherals with RGB output to
EXTERNAL 1
or
3
as RGB provides a better picture quality.
2150.2 gb (16X24) RC2 26-06-2002 10:47 Pagina 27