Philips 32PW8807, Руководство пользователя

Страница: 12 / 16

12
Connections
Depending on the versions, the TV set is equipped with 2 or 3
SCART connectors EXT1, EXT2 and EXT3 located on the rear.
Two special adaptors (scart to cinch) are provided with your TV.
Connect the adaptor with
INPUT
/
OUTPUT
switch to EXT2 and the
other adaptor to EXT1 or EXT3.
The EXT1 connector has audio video inputs/outputs and RGB inputs.
The EXT2 connector has audio video inputs/outputs and S-VHS inputs.
The EXT3 connector has audio video inputs.
Carry out the connections featured opposite. Use the adaptor
with
INPUT
/
OUTPUT
switch setted in the
INPUT
position.
If you are using a mono video recorder, connect only the VIDEO
and AUDIO L sockets. If you are using a S-VHS video recorder,
connect the S-VIDEO cable to the S-VIDEO input.
If your video recorder does not have a SCART connector, the only possible
connection is via the aerial cable.You will therefore need to tune in your
video recorder’s test signal and assign it programme number 0 (refer to
manual installation p.5).To reproduce the video recorder picture, press
0
.
Video recorder
Satellite receiver, decoder, DVD, games, etc.
Carry out the connections featured opposite. Use the special
adaptor (scart to cinch) provided with your TV.
If you have a DVD player with S-video, use the EXT2 socket and
connect the S-VIDEO cable to the S-VIDEO input. For digital
equipment or a decoder, go to the
SETUP
menu settings (see
next page).
To select connected equipment
Press
n
to select
EXT1
or
EXT2
(or
EXT3)
. Most equipment
(decoder, video recorder) carries out this switching automatically (via
the SCART connector).
Make the connections as shown opposite.With the key
n
,
select FRONT.
For a monophonic device, connect the audio signal to the AUDIO L
input. Use the
e
key to reproduce the sound on the left and right
speakers of the TV set.
Headphones
The
@ ” #
keys are used to adjust the volume. Press the
m
key to mute the sound on the TV set (see also sound
settings, page 6).
The headphone impedance must be between 8 and 4000 ohms.
Other equipment
Side connections
CABLE
EXT 2
CABLE
AUDIO
VIDEO
S•VIDEO
*
To connect to a Hi-fi equipment, use an audio connection
cable and connect the “L” and “R” outputs of the TV set to
the “AUDIO IN” “L” and “R” input of the Hi-fi equipment.
Amplifier
AUDIO
SOCKET FOR EXT1 / EXT3
VIDEO
AUDIO R
AUDIO L
SOCKET FOR EXT2
VIDEO
S-VIDEO
AUDIO R
AUDIO L