Philips 32PFL5406H, Руководство пользователя

Страница: 41 / 55

39
Use one-touch play
1
After you switch on EasyLink, press play
on your device.
»
The TV automatically switches to the
correct source.
Use one-touch play control
If you connect multiple HDMI-CEC devices
that support this setting, all such devices
respond to the play control buttons on this
TV remote control.
Caution
†
This is an advanced setting. Devices that do
not support this setting will not respond to the
TV remote control.
1
Press .
2
Select [Setup] > [TV settings] >
[EasyLink] > [EasyLink remote control] .
3
Select [On] or [Off] , then press OK .
Use one-touch standby
When you press on the TV remote control,
the TV and all HDMI-CEC compliant devices
switch to standby mode.
1
Press ( Standby-On ) on the TV’s or
device’s remote control.
»
The TV and all connected HDMI
devices switch to standby.
Use Philips EasyLink
Get the most out of your HDMI-Consumer
Electronic Control (CEC) compliant devices
with Philips EasyLink enhanced control
features. If your HDMI-CEC compliant devices
are connected through HDMI, you can control
them at the same time with your TV remote
control.
To enable Philips EasyLink, you need to:
†
Connect at least two HDMI-CEC
compliant devices through HDMI
† ˜J]\W<**>X,ˆ‰Š‹Œ˜ª˜XJ?[~;>]Y
device properly
† Switch on EasyLink
Note
† The EasyLink-compliant device must be
switched on and selected as the source.
† Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
Switch on or off EasyLink
When you play an HDMI-CEC compliant
device, the TV switches on from standby, and
switches to the correct source.
Note
†
If you do not intend to use Philips EasyLink,
switch it off.
1
Press .
2
Select [Setup] > [TV settings] >
[EasyLink] > [EasyLink] .
3
Select [On] or [Off] , then press OK .
English
EN