2005 HF Series User’s Manual
112505.0959
6
A Guest Remote may be used to access a limited menu and to perform the basic
control functions of the television. Remote control RC2573GR is an optional remote
control specifically for configuring Institutional TV / Business Display Solutions features
and SmartCard settings. Refer to the documentation for the RC2573GR for detailed
information. Remote controls are optional accessories for all HF-series products and must
be purchased separately.
When the RC2573GR in is setup mode and RECALL is pressed, information
similar to below will appear on the TV screen. This information describes the TV chassis
firmware version, diagnostic codes, setup information, and other service and technical
data regarding the television configuration.
Line 1 shows the SmartPort Processor part number. Line 2 shows the software
version number. Line 5 shows the model number of the set (no distinction is made on
screen size). Lines 3, 4, 6 are blank. Line 7 shows the communication mode (always SP-
SPI for these models) and the status of the SmartPort, either online or offline. Line 8
shows the source or channel that has been selected and if a signal is detected on that
source (Tuned or Not Tuned). Below is an example screen:
01
3104 337 01381
02
IJ5U1-1.0
03
04
05
MODEL xxHF7543 / 37
06
07
COMMUNICATION SP-SPI ONLINE
08
TV 3 TUNED
