Philips 3000 series Скачать руководство пользователя страница 44

Страница: 44 / 79

PHILIPS 4000 and 3000 05 SERVICE MODE

3/18

Press buttons from 1 to 7

Only when a button is pressed a O appears on the relative position of

button pressed.

In the middle of display appears the name of the button pressed.

Pressing buttons on the left the backlight color changes from

GREEN to YELLOW.

Pressing button on the right the backlight color changes from

GREEN to RED.

When a button is pressed, also the Stand-By led (RED) turn ON.

Note:

Press button Z7 as the last once, since it makes

change the test page.

Note:

If 2 or more buttons are pressed the name that appears

on display could be wrong.

ERROR:

If nothing appears on display; check the interface board and the flat cable (JP21).

ERROR:

If during the movement the backlight remain green check the wiring (JP1) from the in

terface board and the display

ERROR:

The name displayed is wrong; check the position of jumper in interface. It must be the

same of machine model.

The machine passes to the level 2 (INPUTS)

Warning:

if the Lever sensor is not connected to interface will

appear a warning message.

Page 1 (KEYBOARD)

Page 2 (INPUTS)

Start condition

Press

“ ” to move to the next screen

Содержание 3000 series
















































































Результаты поиска

Содержание 3000 series

Отзывы:

Бренды по названию

Популярные бренды

Philips 3000 series, Руководство по обслуживанию

Результаты поиска

Содержание 3000 series

Отзывы:

Бренды по названию

Популярные бренды