23
FRONT
REAR
R
L
,,
,,
,,
,
,
,,,
,,,
,,,
,
,
c
d
Camera and camcorder
•
Connect your camera or camcorder at the right side of your TV.
•
Connect the equipment to
VIDEO
2
and
AUDIO L
3
for mono equipment.
•
Press the
X
key under the door of the remote control repeatedly to select
the sound coming from one or both loudspeakers of your TV.
•
For stereo equipment also connect
AUDIO R
3
.
S-VHS quality with a S-VHS camcorder is obtained by connecting the S-VHS
cables with the
S-VIDEO
input
1
and
AUDIO
inputs
3
.
Audio equipment / Amplifier
•
Connect the audio cables to the audio input of your audio equipment and to
AUDIO L
and
R
at the back of your TV.
You can listen to your TV sound via your audio equipment.
Extra loudspeakers
You can replace the left and right loudspeakers of your set by two extra
loudspeakers, min. 8 Ohm.
•
Connect the two loudspeakers to the connector clips at the back of the TV.
Connect the left front loudspeaker at
FRONT L
; the right front loudspeaker at
FRONT R
.
Push the connector clip down and insert the end of the wire into the opening: the
positive wire (the one with the black line) to the red loudspeaker connection; the
negative wire to the black loudspeaker connection. Do not insert the wires too far.
•
Select a low volume adjustment and put the loudspeaker switch at the back in
the
¬
position.
The internal right and left loudspeakers of your TV are now switched off.
AUDIO
VIDEO
S•VIDEO
1
2
3
AUDIO
4821.1 gb 19-02-1999 14:52 Pagina 23
