Philips 28PW9309, Руководство пользователя

Страница: 12 / 32

8
Teletext level 2.5
Some broadcasters offer the opportunity to
see more colours, other background colours
and nicer pictures in the teletext pages.
&
Select Teletext level 2.5 .
é Press the cursor right to select
Teletext level
2.5 On to take advantage of this feature.
“ Press the cursor right again to select
Teletext
level 2.5 Off if you like the more neutral
teletext layout.
The selection made is valid for all channels
which broadcast teletext level 2.5.
Note: It may take a few seconds before teletext
broadcast switches over to Teletext level 2.5.
Auto Surround
Sometimes the broadcaster transmits special
signals for Surround Sound encoded
programmes.The TV automatically switches to
the best surround sound mode when
Auto
Surround
is switched
On
.
Set/Change code
The Child lock feature (see TV, Features, p. 11)
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels, a 4-digit code must be
entered.The Set/Change code menu item
allows you to create or change a Personal
Identification Number (PIN).
& Select
Set/Change code
.
é
If no code exists yet, the menu item is set to
Set code.
If a code has previously been entered, the menu
item is set to
Change code
. Follow the
instructions on screen.
Important:You have forgotten your code !
& Select
Change code
in the General menu and
press
OK
.
é Press the cursor right and enter the overriding
code 8-8-8-8.
“ Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
If a decoder or a descrambler is connected, see
p. 15, you can define one or more programme
numbers as decoder programme numbers.
&
Select Decoder with the cursor right.
é Select
Programme
.
“
Select the programme number under which
you have stored the programme coming from
your decoder.
‘ Select
Status
.
• Select the input used to connect your
decoder:
None
,
EXT1
or
EXT2
.
• Select
None
if you do not want the selected
programme number being activated as a
decoder programme number.
Note: Select
EXT2
when the decoder is connected
to your EasyLink video recorder.
Decoder
Decoder
Programme
Status
Setup
Source
This menu allows you to indicate the peripheral
you connected to one of the external inputs.
&
Press the cursor right to enter the list of types
of peripherals attached to the selected input.
é
Select the peripheral device with the cursor
up/down.
Once you have selected the source type, e.g.
DVD, this source will automatically be selected
when your remote control is in DVD mode,
see p. 3, and when you press the
v
key on
the remote control.
Centre input
When you have connected a Cinema Link
surround receiver to the TV (See separate
Cinema Link instruction manual supplied) and
you have selected
EXT1
as centre input, the
loudspeakers of the TV will act as centre
speaker, making a separate centre speaker
unnecessary.
Source
EXT1
EXT2
SIDE
(Centre input)
Setup
2292.2 en 22-03-2004 15:35 Pagina 8