Philips 28PW8651/12, Руководство пользователя

Страница: 15 / 42

11
Make the connections as shown opposite.
* Depending on version.
With the
n
key, select
EXT3
.
For a mono set, connect the sound signal to the AUDIO L
(or AUDIO R) input.The sound automatically comes out of
the left and right speakers of the set.
Headphones
Press the
m
key to mute the sound on the TV set
(see also sound settings, page 6).
The headphone impedance must be between 32 and
600 Ohms. Do not connect VIDEO and S-VIDEO cable at
the same time.This may cause picture distortion.
Side connections
S-VHS
Video
R Audio L
*
S-VHS, Hi-8
S-VHS
Video
R Audio L
*
VHS, 8 mm
S-VHS
Video
L Audio R
*
S-VHS, Hi-8
S-VHS
Video
L Audio R
*
VHS, 8 mm
*
*
Glossary
RGB Signals :
These are 3 Red, Green and Blue video signals which directly drive the red, green and blue
emitters in the cathode ray tube. Using these signals provides better picture quality.
NICAM sound :
Process by which digital sound can be transmitted.
System :
Television pictures are not broadcast in the same way in all countries.There are different standards:
BG, DK, I, and L L’.The SYSTEM setting (p. 6) is used to select these different standards.This is not to
be confused with PAL or SECAM colour coding. Pal is used in most countries in Europe, Secam in
France, Russia and most African countries.The United States and Japan use a different system called
NTSC.
100Hz :
Conventional televisions (50 Hz) produce a visible image flicker.Thanks to 100 Hz technology, the
scanning frequency is doubled. It is visually more comfortable and the flickering effect is reduced.
16:9 :
Refers to the ration between the length and height of the screen.
Wide screen televisions have a ration of 16/9, conventional screen TV sets have a ration of 4/3.
Esp Zappa 1332.3 GB 1-18 1/9/06 3:00 PM Page 11