Philips 26FW5220, Руководство по обслуживанию

Страница: 25 / 150

Menu explanation
1. LLLLL. This represents the run timer. The run timer counts normal operation hours, but
does not count standby hours.
2. AAABCD-X.Y/EEEEEE F.GG This is the software identification of the main
microprocessor:
n
A = the project name (LC42).
n
B = the region: E= Europe, A= Asia Pacific, U= NAFTA, L= LATAM.
n
C = the software diversity:
n
Europe: T= 1 page TXT, F= Full TXT, V= Voice control.
n
LATAM and NAFTA: N= Stereo non-dBx, S= Stereo dBx.
n
Asian Pacific: T= TXT, N= non-TXT, C= NTSC.
n
ALL regions: M= mono, D= DVD, Q= Mk2.
n
D = the language cluster number.
n
X = the main software version number (updated with a major change that is incompatible
with previous versions).
n
Y = the sub software version number (updated with a minor change that is compatible
with previous versions).
n
EEEEEE = the scaler sw cluster
n
F = the main sw version no.
n
GG = the sub-version no.
3. SAM. Indication of the Service Alignment Mode.
4. Error Buffer. Shows all errors detected since the last time the buffer was erased. Five
errors possible.
5. Option Bytes. Used to set the option bytes. See “Options” in the Alignments section for a
detailed description. Seven codes are possible.
6. Clear. Erases the contents of the error buffer. Select the CLEAR menu item and press the
MENU RIGHT key. The content of the error buffer is cleared.
7. Options. Used to set the option bits. See “Options” in the Alignments section for a detailed
description.
8. AKB. Used to disable (Off) or enable (On) the “black current loop” (AKB= Auto Kine Bias).
9. Tuner. Used to align the tuner. See “Tuner” in the Alignments section for a detailed
description.
10. White Tone. Used to align the white tone. See “White Tone” in the Alignments section for a
detailed description.
11. Geometry. Used to align the geometry settings of the television. See “Geometry” in the
Alignments section for a detailed description.
12. Audio. No audio alignment is necessary for this television set.
13. NVM Editor. Can be used to change the NVM data in the television set. See table “NVM
data” further on.
14. SC NVM Editor. Can be used to edit Scaler NVM.
15. ComPaIr. Can be used to switch on the television to In System Programming (ISP) mode,
for software uploading via ComPair. Caution: When this mode is selected without ComPair
connected, the TV will be blocked. Remove the AC power to reset the TV.