Philips 250ML, Руководство по эксплуатации

Страница: 36 / 60

Operation Guide
250ML Lighting Control Consoles
3 5
OPERATION
Record (Minus Subs) can be activated by holding down the SHIFT key while pressing Record. This shall be referred
to as SHIFT + RECORD.
Figure 49: Record Minus Subs Screen
From here, press the submaster bump button in which you want to record the console's output and then ENTER to
confirm (or you can press and hold the bump button for 3 seconds).
11. Recording a Playback
Once the channels levels are at the desired levels, the first step is to place the desk into Record Mode. See “Channels
and Channel Levels” on page 23 for more information.
Figure 50: Recording a Playback - Record Mode Screen
Note: In Record Mode, many commands are limited to recording actions.
The next step after RECORD is pressed is to select a submaster by pressing its bump button. The selected submaster's
bump button will flash red to indicate that the active live channels are in the process of being stored into the selected
submaster. The following screen shows the options once the submaster has been selected by pressing its bump button.
Figure 51: Changing the Settings of Stored Submaster
• This screen gives the user the option to change the settings that are stored on the submaster. Most of these settings
will determine how the submaster outputs its stored data when activated.