manualshive.com logo in svg

Philips 250ML, Руководство по эксплуатации

Поделиться
Скачать
Philips 250ML Скачать руководство пользователя страница 35

Record (Minus Subs) Submaster

34

250ML Lighting Control Consoles

Operation Guide

• Rotate Encoder D to identify the first letter for the label (Shift will allow for Upper Case letters) and press down on 

Encoder D to Select the highlighted letter. Repeat as necessary to add all letters to the label.

• Once the name is selected use Encoder D to select ENTER to complete the naming of the Submaster.

• The screen now returns to the Recording screen.

• Encoder C: allows the adjustment of fade up time. Reference 

Figure 43 on page 31

 for the remaining encoder 

information.

• Adjusting the encoder clockwise will add time in seconds. Adjusting the encoder counterclockwise will reduce 

time in seconds. Holding the shift key will rotating shall adjust in 1/10th of a second.

• Encoder D: allows the adjustment of fade down time. Adjusting the encoder clockwise will add time in seconds. 

Adjusting the encoder counterclockwise will reduce time in seconds. Holding the shift key will rotating shall 
adjust in 1/10th of a second.

• When all settings are correct, press [ENTER] to complete the record sub action. An alternate method is to press 

and hold the submaster's bump button for 3 seconds to complete the record command.

• Once the submaster is recorded, the submaster's bump button will be lit in red and the channel's levels will still be 

active in red. Press [CLR] [CLR] to release and now the submaster shall function correctly.

When the channels have been released, take the submaster to full and confirm that the submaster was recorded as
expected as shown in 

Figure 48

.

Figure 48:  Recorded Channels to Full

Note:  

Not only will the channel's level display in amber but the sub listing will show the sub's level in the Step 

column and the submaster’s background will be in yellow.

10. Record (Minus Subs) Submaster

Record (Minus Subs) allows the ability to record a submaster ignoring all values that are outputting from active
submasters.

All options and rules about recording still apply with the exception of active submaster levels.

This can be very useful if looks are recorded onto submasters that are currently outputting but you don't want that
information to be captured in the new items that is being stored. (House lights and work lights are a great example).

All Levels to Full (FL)

Содержание 250ML





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды