Philips 24PHT5565/73, Руководство по обслуживанию

Страница: 16 / 33

32”/43” Series:
1. Unplug the connector from the SSB.
Caution: be careful, as these are very fragile connectors!
2. Remove fixation screws [1] and connector [2] from the IR board control unit.
3. Press the snap that marked by blue box below backward then take out the IR board.
When defective, replace the whole unit.
3.2.4 Small Signal Board (SSB)
Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the SSB.
1. Unplug all connectors [2] from the SSB.
2. Remove all the fixation screws [3] from the SSB.
3
1
1
2
2