These operations are accessible by remote control.
Some may also be accessible by the main unit's control
panel.
Setup wizard
This section will guide you through the unit’s Setup wizard which
includes selecting a language for your On-screen menu and auto
scan, which automatically scans and memorizes viewable channels.
Before you begin:
Make sure the unit is connected to an antenna or cable.
1
After making all the necessary connections, press
to turn on the
unit.
Ɣ
It may take a few moments to turn on the unit for the first time.
Ɣ
Setup Wizard
menu appears automatically after the unit is
turned on.
2
Use
to select
Menu Language
and use
to select
English
,
Spanish
or
French
.
3
Use
to select
Go to next step
and press
OK
.
4
Use
to select
Time Zone
and use
to select
Pacific
/
Alaska
/
Hawaii
/
Atlantic
/
Eastern
/
Central
/
Mountain
.
5
Use
to select
Daylight Saving Time
and use
to select
On
/
Off
.
6
Use
to select
Time Format
and use
to select
24-hour
/
12-hour
.
7
Use
to select
Go to next step
and press
OK
.
8
Use
to select
Air/Cable
and use
to select
Air
/
Cable
.
–
When
Air
is selected, the TV detects antenna signals. It
searches for DTV and analog TV channels available in your
area.
–
When
Cable
is selected, the TV detects signals supplied by
cable. It searches for DTV, analog TV and cable channels
available in your area.
9
Use
to select
Go to next step
and press
OK
.
Ɣ
Auto Tuning will begin.
Auto Tuning
Total Found
Analog
Digital
RF CH
Please press MENU key to exit
After an setup wizard is completed...
Ɣ
If you want to scan the channels automatically again.
Auto Scan
p.
23
Ɣ
You can add the desired cable and analog channels not memorized
by auto scan.
Favorite
p.
24
Ɣ
If you want to change to another language.
Menu Language
p.
28
15
.
English
