Philips 24hfl3011t, Руководство пользователя

Страница: 35 / 51

menu.
Sleep timer
With the sleep timer, you can set the TV to switch to
standby automatically after a preset time.
To set the sleep timer...
1. Consumer Mode: On

Press

HOME .
Guest Mode: On

Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select
Setup > TV settings > General settings >
Sleep timer .
With the slider bar you can set the time to up to 180
minutes in increments of 5 minutes. If set to
0 minutes, the sleep timer is switched off.You can
always switch off your TV earlier or reset the
time during the countdown.
3. Press

, repeatedly if necessary, to close
the menu.
Switch off timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period,
the TV switches off automatically to save energy.
Also, if the TV does not receive a TV signal nor a
remote control command for 10 minutes, the TV
switches off automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch off timer...
1. Consumer Mode: On

Press

HOME .
Guest Mode: On

Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select
Setup > TV settings > General settings >
Switch off timer .
3. Select inside the slider bar to adjust the value. The
value 0 (Off) deactivates the automatic switch off.
4. Press

, repeatedly if necessary, to close the
menu.
Location
To set the TV for Home use...
1. Consumer Mode: On

Press

HOME .
Guest Mode: On

Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select
Setup > TV settings > General settings >
Location and press OK .
3. Select Home and press OK .
4. Press

, repeatedly if necessary, to close the
menu.
TV placement
As part of the first installation, this setting is set to
either
On a TV stand or On the Wall . If you
have changed the placement of the TV since then,
adjust this setting accordingly for best sound
reproduction.
1. Consumer Mode: On

Press

HOME .
Guest Mode: On

Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select
Setup > TV settings > General settings > TV
Placement and press OK .
3. Select On a TV stand or On the Wall .
4. Press

, repeatedly if necessary, to close the
menu.
Factory settings
You can set the TV back to the original TV settings
(the factory settings).
To switch back to the original settings...
1. Consumer Mode: On

Press

HOME .
Guest Mode: On

Guest Menu: Not available in
Guest Menu.
(For professional mode information, please refer to
Installation manual)
2. Select
Setup > TV settings > General settings >
Factory Settings and press OK .
3. Press

, repeatedly if necessary, to close
the menu.
35