30
CE Declaration of Conformity
This product is in conformity with the following
standards:
v
EN60950-1:2006 (Safety requirement of
Information Technology Equipment).
v
EN55022:2006 (Radio Disturbance
requirement of Information Technology
Equipment).
v
EN55024:1998+A1:2001+A2:2003
(Immunity requirement of Information
Technology Equipment).
v
EN61000-3-2:2006 (Limits for Harmonic
Current Emission).
v
EN61000-3-3:1995+A1:2001+A2:2005
(Limitation of Voltage Fluctuation and
Flicker) following provisions of directives
applicable.
v
2006/95/EC (Low Voltage Directive).
v
2004/108/EC (EMC Directive).
v
2005/32/EC (EuP Directive, EC No.
1275/2008 mplementing Directive
for Standby and Off mode power
consumption) and is produced by a
manufacturing organization on ISO9000
level.
The product also comply with the following
standards.
v
ISO9241-307:2008 (Ergonomic
requirement, Analysis and compliance test
methods for electronic visual displays).
v
GS EK1-2000:2009 (GS mark requirement).
v
prEN50279:1998 (Low Frequency Electric
and Magnetic fields for Visual Display).
v
MPR-II (MPR:1990:8/1990:10 Low
Frequency Electric and Magnetic fields).
v
TCO Displays 5.1 (Requirement for
Environment Labeling of Ergonomics,
Energy, Ecology and Emission, TCO: Swedish
Confederation of Professional Employees)
for TCO versions.
Energy Star Declaration
(www.energystar.gov)
As an ENERGY STAR® Partner, we
have determined that this product
meets the ENERGY STAR®
guidelines for energy efficiency.
Note
We recommend you switch off the monitor
when it is not in use for a long time.
Federal Communications Commission (FCC)
Notice (U.S. Only)
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy
and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures:
v
Reorient or relocate the receiving antenna.
v
Increase the separation between the
equipment and receiver.
v
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
v
Consult the dealer or an experienced
radio/TV technician for help.
6. Regulatory Information
