Philips 221P3LPYEB/00, Руководство по обслуживанию

Страница: 105 / 122

Meridian 3 105
3.2.3 DP Cable (for 221P3LPY)
The input signals are applied to the display through DP cable.
Length : 1.8 M +/- 50 mm
Connector type : DP male with DDC-2B pin assignments
White connector thumb-operated jackscrews
With transplant pin protective cover.
Pin Assignment:
Pin Signal Assignment Pin Signal Assignment
1 ML_Lane 3(n) 11 Ground
2 Ground 12 ML_Lane 0(p)
3 ML_Lane 3(p) 13 Ground
4 ML_Lane 2(n) 14 Ground
5 Ground 15 AUX_CH (P)
6 ML_Lane 2(p) 16 Ground
7 ML_Lane 1(n) 17 AUX_CH (N)
8 Ground 18 Hot Plug Detect
9 ML_Lane 1(p) 19 Return DP_PWR
10 ML_Lane 0(n) 20 DP_PWR
3.3 Timing Requirement
Factory Preset Mode Definition:
a. Perfect FOS while presenting those timings.
b. Will specify those timing in User's Manual
Preset Mode Definition
a. Need to support those timings
b. Perfect FOS after auto adjustment.
User Mode
a. Can save those timing that not in Preset mode and can be showed (not over scaler or Panel spec.)
b. It needs to reserve the 10 timings space in memory size.
3.3.1 Mode Storing Capacity
Factory preset modes : 15
User modes : 41
User modes : 10
3.3.2 Factory Preset Modes (D-SUB 15 modes)
1. Factory modes and preset modes are defined in the enclosed timing table file
ŎĴġijijIJġŔŦųŪŦŴġ
ŕŪŮŪůŨġŵŢţŭŦġŭŪŴŵĮIJıIJı