Philips 221P3LPEB/00 Скачать руководство пользователя страница 92

Страница: 92 / 93

92 Meridian 3

10. Regulatory Compliance

10.1 Worldwide Regulatory

Follow up agreed approbation plan TYE-A0004

˪˪˲˥˸˺̈˿˴̇̂̅̌ˁ̋˿̆

10.2 EMC Requirements

Supplier DVT EMI test result must be submitted prior to DVT samples delivery, and PVT EMI test result must

be submitted again prior to PVT samples delivery, which also has to meet Philips' immunity testing

specification.

10.3 RoHS

Restriction on the use of certain hazardous substances.

Lead, Cadmium, Mercury, Hexavalent Chromium, Polybrominated Bipheny1 (PBB) and Polybrominated

Bipheny1 Ether (PBDE) (flame retardant).

10.4 WEEE

Producers (Philips) responsible for retailer take back schemes and recycling.

--System implemented.

--Collection and recycle targets.

10.5 Ongoing Regulatory

There's a possibility that other regulatory certificates will be required during the life of the product. It is the

responsibility of the supplier to provide related documentation.

Содержание 221P3LPEB/00






























































































Результаты поиска

Содержание 221P3LPEB/00

Отзывы:

Philips 221P3LPEB/00, Руководство по обслуживанию, Страница: 92 / 93

Результаты поиска

Содержание 221P3LPEB/00

Отзывы: