Philips 220TW9FB, Руководство пользователя

Страница: 22 / 44

EN-22
Automatically switch to standby
(Sleeptimer)
Sleeptimer switches the TV Monitor to standby
after a defined period of time.
Press 1. MENU on the remote control and
select Features > Timer > Sleeptimer .
Press 2.
Æ
to enter the Sleeptimer menu
Press 3.
Î
or
ï
to set the sleep time up to
180 minutes in steps of five minutes. If set
to zero minutes, the Sleeptimer is switched
off.
Press
4. OK to activate the Sleeptimer.
Note
D
You can always switch off your TV Monitor
earlier or reset Sleeptimer during the
countdown.
Automatically switch on (Start time)
Start time switches the TV Monitor to a
specified channel at a specified time, from
standby.
Press 1. MENU on the remote control and
select Features > Timer > Start time .
Press 2.
Æ
to enter the start time menu.
Use 3.
Î
or
ï
,
Æ
or
Í
to select and enter
the menu items to set.
Press
4. OK to confirm your choice.
Press 5. MENU to exit.
Tip
E
To switch off Start time, select Off in the
Start time menu.
Automatically switch off (Stop time)
Stop time switches the TV Monitor to standby
at a specified time.
Press 1. MENU on the remote control and
select Features > Timer > Stop time .
Press 2.
Æ
to enter the Stop time menu.
Use 3.
Î
or
ï
,
Æ
or
Í
to select and enter
the menu items to set.
Press
4. OK to confirm.
Press 5. MENU to exit.
Note
D
You can always switch off your TV Monitor
earlier or reset Sleeptimer during the
countdown.
Lock TV channels or connected devices
(Auto Lock)
Lock TV channels or connected devices with
a four digit code to prevent children from
watching unauthorised content.
To set or change the Auto Lock code
Press 1. MENU on the remote control and
select Features > Auto lock > Change
code .
Press 2.
Æ
to enter the code setup.
Enter your code with the number keys. 3.
The Features menu reappears with a
message confirming that your code is
created or changed.
Tip
E
If you forget your code, enter ‘0711’ to
override any existing codes.
To enter the Auto Lock menu
Press 1. MENU on the remote control and
select Features > Auto Lock and press
Æ
to enter your code.
Enter your code with the number keys. 2.
To unlock all channels and connected
devices
In the 1. Auto Lock menu, select Clear all�
Press 2. OK .