Philips 19PFL3606H, Руководство пользователя

Страница: 15 / 44

13
English
ˆ [Gamma] : Adjust the midtone
intensity in the picture. Black and
white are not affected.
ˆ [PC mode] : Adjust the picture when a PC
is connected to the TV via HDMI or DVI.
ˆ [Picture format] : Change the picture
format.
ˆ [Screen edges] : Adjust the viewing area.
(when set to maximum, you may see
noise or the rough edge of an image).
ˆ [Picture shift] : Adjust the picture position
for all picture formats except for [Auto
zoom] and [Wide screen] .
Manually adjust picture settings
1
Press .
2
Select [Setup] > [TV settings] >
[Picture] , then press OK .
3
Select one of the following settings, then
press OK .
ˆ [Smart picture] ›œXX*ZZ[<*Q*\]*QZ?><Y
picture settings.
ˆ [Reset] : Reset to factory default settings.
ˆ [Contrast] : Adjust the intensity of
backlight areas, while the video contents
are kept unchanged.
ˆ [Brightness] : Adjust the intensity and
details of dark areas.
ˆ [Colour] : Adjust colour saturation.
ˆ [Hue] : Compensate for colour variations.
ˆ [Sharpness] : Adjust sharpness in the
image.
ˆ [Noise reduction] : Filter and reduce
noise in an image.
ˆ [Tint] : Adjust the colour balance in an
image.
ˆ [Custom tint] : Customise tint setting.
(Only available if [Tint] > [Custom] is
selected)
ˆ [Digital Crystal Clear] : Fine-tune each
pixel to match surrounding pixels. This
Z*YY;]~[<JQWX*Z> <;}};>]Y‡,;~,ŽQ*\];Y;J]
image.
ˆ
[Advance sharpness] : Enable
superior picture sharpness.
ˆ [Dynamic contrast] : Enhance
contrast. [Medium] setting is
recommended.
ˆ [Dynamic backlight] : Adjust
brightness of the TV backlight to
match lighting conditions.
ˆ [MPEG artifact reduction] : Smooth
out transitions on digital pictures.
You can switch this feature on or off.
ˆ [Colour enhancement] : Make
colours more vivid and improve the
details in bright colours. You can
switch this feature on or off.
EN