En
gl
is
h
Retain picture quality
If your TV picture quality is affected by the
picture-processing features of other devices,
switch on Pixel Plus Link.
1
Connect an HDMI-CEC compliant device
to the HDMI connector.
2
Configure the HDMI-CEC compliant
device properly (see the device user
manual).
3
Press .
4
Select
[Setup]
>
[TV settings]
>
[EasyLink]
>
[EasyLink]
.
5
Select
[On]
, then press
OK
.
6
Select
[Pixel Plus Link]
>
[On]
, then press
OK
.
Use a Kensington lock
There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
5
Select
[Setup]
>
[TV settings]
>
[EasyLink]
>
[EasyLink]
.
6
Select
[On]
, then press
OK
.
7
Select
[TV speakers]
, then press
OK
.
8
Select one of the following, then press
OK
.
[Off]
: Switch off TV speakers.
[On]
: Switch on TV speakers.
[EasyLink]
: Stream TV audio through
the connected HDMI-CEC device.
Switch the TV audio to the connected
HDMI-CEC audio device through the
adjust menu.
[EasyLink autostart]
: Turn off TV
speakers automatically and streams TV
audio to the connected HDMI-CEC
audio device.
Note
To mute the TV speakers, select
[TV speakers]
>
[Off]
.
•
Select speaker output with Adjust menu
If
[EasyLink]
or
[EasyLink autostart]
are
selected, access the adjust menu to switch the
TV audio.
1
While you watch TV, press
ADJUST
.
2
Select
[Speaker]
, then press
OK
.
3
Select one of the following, then press
OK
:
[TV]
: On by default. Stream TV audio
through TV and the connected HDMI-
CEC audio device until the connected
device switches to system audio
control. TV audio is then streamed
through the connected device.
[Amplifier]
: Stream audio through
the connected HDMI-CEC device. If
system audio mode is not enabled on
the device, audio continue to stream
from the TV speakers. If
[EasyLink
autostart]
was enabled, the TV
prompts the connected device to
switch to system audio mode.
•
•
•
•
•
•
EN
