Safety and Troubleshooting Information
●
Do not store or use the LCD monitor in locations exposed to heat, direct sunlight or
extreme cold.
●
In order to maintain the best performance of your monitor and use it for a longer lifetime,
please use the monitor in a location that falls within the following temperature and
humidity ranges.
❍
Temperature: 0-40°C 32-95°F
❍
Humidity: 20-80% RH
●
IMPORTANT:
Always activate a screen saver program during your application. If a still
image in high contrast remains on the screen for an extended period of time, it may leave
an 'after-image' or 'ghost image' on front of the screen. This is a well-known phenomenon
that is caused by the shortcomings inherent in LCD technology. In most cases, the
afterimage will disappear gradually over a period of time after the power has been
switched off. Be aware, that the afterimage symptom cannot be repaired and is not
covered under warranty.
Service:
●
The casing cover should be opened only by qualified service personnel.
●
If there is any need for any document for repair or integration, please contact with your
local service center. (please refer to the chapter of "Consumer Information Center")
●
For transportation information, please refer to "Physical Specifications".
●
Do not leave your monitor in a car/trunk under direct sun light.
Consult a service technician if the monitor does not operate normally, or you are
not sure what procedure to take when the operating instructions given in this
manual have been followed.
RETURN TO TOP OF THE PAGE
共 2 [2007/7/17 上午 10:35:12]
file:///H|/OEM MODELS/Philips 2007/CD Manual/19/190SW8/190SW8 EDFU 0713-2007/lcd/manual/English/190SW8/safety/safety.htm 第 2 頁 /