Philips 190C1SB/00, Руководство по обслуживанию

Страница: 73 / 94

General Product Specification
iii. Design:
1. Brightness level set to 70%, a little higher brightness level than
laptop PC, fine tune brightness level before DVT exit.
2. Color temperature set to original
3. Gamma Table is turn on to reduce bad color tracking.
E. Off
i. Purpose: No optimization by SmartImage.
ii. Design:
1. This will follow user OSD setting. If any change by user, it will be
saved. When switch back from other SmartImage profiles, it will
go back to last saved setting.
2. Gamma Table is turn on to reduce bad color tracking.
3.16.1.7 Demo mode
A. Purpose: Built-in demo mode for sales in-store demo.
B. Design:
i. Dynamically split screen to 2 vertical frames with one vertical white line.
The line width is 2 pixels. The left frame will be enhanced by SmartImage
Lite and right frame remains original performance.
ii. There is OSD showing “SmartImage Lite & SmartResponse
Demonstration” in left frame and “Original Image” in right frame.
iii. The OSD word color is white with transparent background.
iv. The demo profile will be “Video Playback” profile with “High” ODC setting.
v. The current SmartContrast value also be shown on the bottom of the
screen.
C. Hot keys to trigger:
Press [Smart Image] 3 seconds or more to trigger the demo mode.
When demo mode is On, press 3 seconds or more to turn off the demo mode.
Visual characteristics
3.17 Test conditions
Unless otherwise specified, this specification is defined
under the following conditions.
(1) Input signal : As defined in 3.3, 1440*900
non-interlaced mode (1440*900@60Hz 146.25MHz),
190C1 LCD 73