background image

3

1. Important

Uninterrupted display of still or 
static images over an extended 
period may cause “Burn-in”, also 
known as “after-imaging” or “ghost 
imaging”, on your screen.

• 

“Burn-in”, “after-imaging”, or 
“ghost imaging” is a well-known 
phenomenon in LCD panel 
technology. In most cases, the 
“burned in” or “after-imaging” or 
“ghost imaging” will disappear 
gradually over a period of time after 
the power has been switched off.

 

Warning

Failure to activate a screen saver, or 
a periodic screen refresh application 
may result in severe “burn-in” or “after-
image” or “ghost image” symptoms 
that will not disappear and cannot be 
repaired. The damage mentioned above 
is not covered under your warranty.

Service

• 

The casing cover should be opened 
only by qualified service personnel.

• 

If there is any need for any 
document for repair or integration, 
please contact with your local 
service center. (Please refer to 
Service contact information listed 
in Regulation & Service Information 
Manual.) 

• 

For transportation information, 
please refer to “Technical 
Specifications”. 

• 

Do not leave your monitor in a car/
trunk under direct sun light.

 

Note

Consult a service technician if the 
monitor does not operate normally, or 
you are not sure what procedure to take 
when the operating instructions given in 
this manual have been followed.

1.2  Notational Descriptions

The following subsections describe 
notational conventions used in this 
document. 

Notes, Cautions and Warnings 
Throughout this guide, blocks of text 
may be accompanied by an icon and 
printed in bold or italic type. These 
blocks contain notes, cautions or 
warnings. They are used as follows:

 

Note

This icon indicates important 
information and tips that help you make 
better use of your computer system.

 

Caution

This icon indicates information that 
tells you how to avoid either potential 
damage to hardware or loss of data.

 

Warning

This icon indicates the potential for 
bodily harm and tells you how to avoid 
the problem.
Some warnings may appear in alternate 
formats and may not be accompanied 
by an icon. In such cases, the specific 
presentation of the warning is 
mandated by the relevant regulatory 
authority.

Содержание 152B1































Отзывы: