Philips 14PV360, Инструкция по эксплуатации

Страница: 8 / 23

Preparation for use
1.
1.
After you have connected the aerial or cable,
confirm the picture on the TV screen with
.
2.
2.
The automatic TV channel search starts.
This picture will appear on the screen.
When automatic TV channel search is com-
plete,'AUTO TUNING COMPLETE' will
appear on the TV screen.
3.
3.
'TIME' and 'DATE' will appear on the TV
screen.
4.
4.
Check 'TIME'. If required, please change the
time with the number buttons .
5.
5.
Check if the displayed settings for 'DAY',
'MONTH' and 'YEAR' are correct.
6.
6.
When all information is correct, save by
pressing .
The preparation for use is now complete.
Decoder allocation
Some TV channels transmit encoded TV signals
which can only be viewed with a commercially
purchased or rented decoder without distur-
bances. You can connect such a decoder to this
TV-Video Combi. The following function will auto-
matically activate the connected decoder for the
desired TV channel.
1.
1.
Use
,
or to select the TV chan-
nel which you would like to allocate the
decoder to.
2.
2.
Press . The main menu will appear.
3.
3.
Use to select 'TUNER SET UP'.
Then press .
4. 4.
Use to select 'MANUAL TUNING'.
Then press .
5.
5.
Use to select 'DECODER'.
6. 6.
Use to select 'ON'
(Decoder switched on).
7.
7.
To end, press .
The decoder has now been allocated to this TV
channel.
STATUS/EXIT
B 1
L C K B
B 1
L C K B
B 1
L C K B
MENU
0..9
P- P+
STATUS/EXIT
0..9
B 1
3. Installing your TV-Video Combi
PLEASE WAIT
START FINISH
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
TIME --:--
DATE --/--/--
SMART CLOCK [ON]
END=EXIT
Connecting additional devices
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.
Satellite receiver
If you are connecting a satellite receiver, please
read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must
install it as described in the next section.
MANUAL TUNING
PROG. P55
CHANNEL 055
→
DECODER [OFF]
SKIP [OFF]
SELECT
K L
CHOOSE
B
END=EXIT
How can I switch off the decoder?
Use to select 'OFF' (Decoder switched
off).
B 1
5
EN
PAL I(EN).qx3 02.4.2 6:42 PM Page 5