10BDL4551T
19
Gmail Security Settings
If you are using Gmail but cannot sent out E-mail, please
check Google Account Security Setting in website:
www.google.com/settings/security/lesssecureapps
turn on “Access for less secure apps”.
Yahoo Account Security Settings
In Yahoo Account Security option, users should enable
“Allow apps that use less secure sign in” option.
(2). Manager Email
Setup manager’s (receiver’s) E-mail address. Device will
send E-mail to this account.
(3). Test
Click “Send Test Mail” will send out a test mail to check if
settings are correct.
FTP
Settings -> Signage Display -> Server Settings -> FTP
Click the checkbox to enable/disable FTP server feature.
After enable, user can setup account, password and port
number.
a). Account: The username for login FTP server. The length
of name in range 4
~
20 charters, and only allow [a-z][A-Z]
[0-9].
b). Password: The password for login FTP server. Password
length in range 6
~
20 charters, and only allow [a-z][A-Z]
[0-9]. The password will show “*” only after set up.
c). Storage path: The FTP server will access internal storage
only. Cannot be changed by user.
d). Port: The port number for FTP server. Available port
number range from 1025 to 65535, default is 2121. The
following port number cannot be used:
8000 / 9988 / 15220 / 28123 / 28124 and SICP network port
(default 5000).
Remote Control
Settings -> Signage Display -> Server Settings -> Remote
Control
Click Enable checkbox to enable/disable remote control
client service, default is disabled. To use remote control
must bind device with remote control server.
“Server” for user input remote control server URL address
(with https:// prefix). If device does not bind with remote
control server before, please input PIN code provided by
server.
Bind status:
(1). When device does not have network, showing “Network
is disconnected”.
(2). If device has network, but not connected with remote
control server, showing “Server is disconnected”.
(3). If server is connected but not bind with server, showing
“Server is unbinded”.
(4). If device bind with server successfully, showing “Server
is binded”.
(5). If PIN code is not correctly, showing “Error PIN code”.
SNMP
Settings -> Signage Display -> Server Settings -> SNMP
Click Enable checkbox to enable/disable SNMP service,
default is disabled.
